Grafters M 9536A is an entry level S1 (no midsole) safety boot suitable for visitors, apprentices and trainees.
A Padded Collar D-Ring Safety Chukka Boot Conforming to European Standard EN ISO 20345 S1.
Protection Benefits from a Steel Safety Toe Cap.
The PU Dual Density Injected Sole Offers Traction Surpassing SRC Slip Resistance Test Standards.
EN ISO 20345 S1 Conforms to the European Stantard EN ISO 20345 S1
Safety Toe Cap Tested to >= 200 Joules Impact & 15kN Compression
A = Antistatic Resistance Between Foot & Ground. (0.1 to 1,000m Ohms)
FO = Fuel Oil Resistant Outsole
E = Heel Energy Absorption Tested to >= 20 Joules
SRC = Sole Meets the Minimum Requirements for Slip Resistance when Tested on a Ceramic Tile Floor wetted with Sodium Lauryl Sulphate Solution and a Stainless Steel Floor wetted with Glycerol Solution
All boots are EU Sized ....
36 = UK 3
37 = UK 4
38 = UK 5
39 = UK6
40 = UK 6.1/2
41 = UK 7
42 = UK 8
43 = UK 9
44 = UK10
45 = UK10.1/2
46 = UK11
47 = UK12
48 = UK13
49 = UK14
50 = UK15
This boot is always held in stock in our store
This website, all of the content is copyright of Thanet Tool Supplies. © Thanet Tool Supplies 2021. All rights reserved. Any redistribution or reproduction of part or all of the contents in any form is strictly prohibited.